Adding H codes in Gpost

[ptc-1089469]

Hi Gurus,

I've got most of my Mach3 post working as I want. Thanks everybody who's helped so far, you've been great. I have one further question.

I've been fooling around with FIL language to get the H code working, so far with no luck. I've also played with some of the settings in GPOST proper.

As we have it we need the T# to be referenced by the H# after the G43.

So T01 would have H01 later in the code, T02 would have H02 and so on.

We're after something like this:

N4500T2
N4502G28M06
N4504S3750M03
N4506G00X3.0006Y.0611
N4508G43H2Z1.125

Any pointers greatly received.

Cheers,

Steven


Steven Dibdin
Design Prototyping Manager
S M A R T D E S I G N
601 W. 26th Street, 18th Floor
New York, NY 10001
T 862 684 1166 direct
T 212 807 8150 indirect
New York * San Francisco * Barcelona
smartdesignworldwide.com
This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

[DanielSantos]

In Reply to Steven Dibdin:

Hi Gurus,

I've got most of my Mach3 post working as I want. Thanks everybody who's helped so far, you've been great. I have one further question.

I've been fooling around with FIL language to get the H code working, so far with no luck. I've also played with some of the settings in GPOST proper.

As we have it we need the T# to be referenced by the H# after the G43.

So T01 would have H01 later in the code, T02 would have H02 and so on.

We're after something like this:

N4500T2
N4502G28M06
N4504S3750M03
N4506G00X3.0006Y.0611
N4508G43H2Z1.125

Any pointers greatly received.

Cheers,

Steven


Steven Dibdin
Design Prototyping Manager
S M A R T D E S I G N
601 W. 26th Street, 18th Floor
New York, NY 10001
T 862 684 1166 direct
T 212 807 8150 indirect
New York * San Francisco * Barcelona
smartdesignworldwide.comhttp://www.smartdesignworldwide.com
Please consider the environment before printing.
This email and any files transmitted with it are confidential. Unauthorized publication, use or dissemination of this email is prohibited.

Hi Steven!

I've attached a few screenshots showing you how to do it without FIL coding. If you need anything diferrent than that or some further manipulation of the registers, I'm afraid you are going to need some FIL coding to do it...

HTH

Regards,

Daniel Santos - Sr. NC Programmer / CAM Support

Liebherr Aerospace Brasil