cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Feed Rate

SOLVED
pesau-2
Guest

Feed Rate

hi,

for all my NC program I get feed rate as F1  even though I enter as Cut_feed = 100, can anyone please suggest what change to be made in GPOST.


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Feed Rate

There is another place you need to set the F register format.  Since the F is used for several things each feed rate mode has its own format.  For UPM it is set on this dialog box.  The places left of the decimal need to match the Maximum value allowed. 

Capture.JPG

Fred

View solution in original post

5 REPLIES 5

Re: Feed Rate

Using the Option File Generator ->File Formats->MCD File, select "F" row-> Edit Selected Address, and adjust your formatting.

ex:

 

Josh

Re: Feed Rate

hi Josh,

Thanks for the reply,

the formatting setting was ok,

But still I get F1 only

Re: Feed Rate

There is another place you need to set the F register format.  Since the F is used for several things each feed rate mode has its own format.  For UPM it is set on this dialog box.  The places left of the decimal need to match the Maximum value allowed. 

Capture.JPG

Fred

View solution in original post

Re: Feed Rate

Hi Fred,

Thank for the support , now its working fine.

Re: Feed Rate

Hello Paulson Esau!

Could you share this post processor 5 axes heidenhain with me?

Thank you very much in advance.

Announcements