cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Did you get called away in the middle of writing a post? Don't worry you can find your unfinished post later in the Drafts section of your profile page. X

Mori Seiki 5-axis Post Processor G-Post issue

GeorgiosLaboura
1-Newbie

Mori Seiki 5-axis Post Processor G-Post issue

Dear pro/Gurus Help!!



I am testing the post for Mori Seiki 5-axis machine.

In 3-axis cutting (X-Y-Z) it works perfect.

When it comes for 5-axis simultaneous cutting then I get a big headache.

Though the rotary -C- axis and the swiveling -B- axis are translated
correct,
-X-Y-Z- is not.

-Z- axis has got wrong depth, -X- and -Y- should be reversed.

The -X- should be -Y- and vice versa when a 5 axis movement takes place.



-- Wrong code-

G0X-103.066Y-60.B45.C-90.

G1Z-26.891

Y60.



-Right Code-

G0X55.Y53.536Z-1.464B45.C-90.

G1X-55.



What I am missing here?




This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
0 REPLIES 0
Top Tags