cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Have a PTC product question you need answered fast? Chances are someone has asked it before. Learn about the community search. X

Postprocessor for Siemens Sinumerik 828D controller

Francesco_Osti
6-Contributor

Postprocessor for Siemens Sinumerik 828D controller

Hello everyone,

I am looking for a post-processor for the controller Siemens Sinumerik 828D.

I have seen several posts about the Sinumeric 810D and 840D here in the community but none about the 828D.

 

Can a post-processor for a generic Siemens controller be used for the Sinumerik 828D? or should I create an 828D-specific post-processor?

Did someone develop a Sinumerik 828D post-processor?

Thank you in advance.

 

Francesco 

1 REPLY 1

We have a CNC(DMG M1 with rotary axis) with the same control unit. I looked at the posts in the community and made a processor. I did a few tries on the machine and it worked fine. But there are some problems on the post output. I want to post first X-Y position then Z position line but some times processor doesn't work properly.  I attached the processor files and the picture that shows the problem. İf someone help me to improve this post processor I'd be appreciated.

 

Note: Tool_Name must be YES on the PPrint settings

 

Example_1.JPG

Top Tags