cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

The PTC Community email address has changed to community-mailer@ptc.com. Learn more.

post processor

shaanmech
1-Newbie

post processor

how to add newly created option file(post processor) to the default postprocessor list plz reply ??? plz help me sir.................

1 ACCEPTED SOLUTION

Accepted Solutions

There is a PP for a FANUC 15M on the postprocessor library available for download. Maybe you can use this as a start point?
Production Postprocessor Library : http://support.ptc.com/cs/cs_27/howto/ncgp4905/ncgp4905.htm

The links at the end of the document refer you to Additional Post Processor Libraries and under Milling you find some more FANUC PPs that you can use and adapt as needed.

View solution in original post

6 REPLIES 6
Olga
1-Newbie
(To:shaanmech)

instance of the new in the folder by default

post.JPG

  • Specify the directory with the with the *.p## (e.g. uncx01.p01) and optional *.f## (e.g. uncx01.f01) files by config.pro option gpostpp_dir.
  • Depending on the PP type, you will find them when expanding Lathes, Mills, etc...

is there any common PP in creo for fanuc controller as in mastercam. in mastercam there is common PP for fanuc controller we have to edit the program after post processing a little bit

There is a PP for a FANUC 15M on the postprocessor library available for download. Maybe you can use this as a start point?
Production Postprocessor Library : http://support.ptc.com/cs/cs_27/howto/ncgp4905/ncgp4905.htm

The links at the end of the document refer you to Additional Post Processor Libraries and under Milling you find some more FANUC PPs that you can use and adapt as needed.

Thank you sir.....

download post 4 axis Creo parametric