cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Did you know you can set a signature that will be added to all your posts? Set it here! X

I am having some real bad graphic issues when I zoom in and out of Creo Parametric 2.0

fpecout
1-Newbie

I am having some real bad graphic issues when I zoom in and out of Creo Parametric 2.0

I am having some bad issues with Creo parametric when i zoom in and out. I will post an attachment below of the problem. I hope someone can help and post specific instructions as i am very new to Creo. Thanks in advance.

GetAttachment.jpg

1 ACCEPTED SOLUTION

Accepted Solutions
dschenken
21-Topaz I
(To:fpecout)

Without more info, here's something to start with to diagnose the problem:

1) Update display drivers

Make a Restore Point, or full backup before updating graphics drivers
Make sure you understand how to use the Restore Point or backup to restore your operating system and data
Look for drivers from the makers of the computer first, then the maker of the card, finally from the maker of the operating system
Note: sometimes the most compatible graphics driver version is not the latest version. Be prepared to look for and try older versions.

For AMD/ATI cards try http://support.amd.com/us/gpudownload/Pages/index.aspx (external link)

2) Avoid using hardware acceleration
Mostly avoided by setting the config option "graphics win32_gdi"
Alternatively try "graphics d3d" for Creo 1, Creo 2, Creo 3

Also possible to add startup command option
1. Right Click on software (Creo) shortcut icon > Properties
2. Click in Target path and move cursor to extreme right (at the end of .....exe")
3. Add a space after .exe"
4. Type -g:win32_gdi > Apply > Ok

3) Use hardware acceleration, but disable some features (try one at a time)
May also benefit from the following config options, Creo Parametric 2.0 M090 and higher:
enable_opengl_fbo no
enable_opengl_vbo no
enable_opengl_shader no
ref http://communities.ptc.com/message/244856#244856 (external link)
Note: fbo = frame buffer object; vbo = vertex buffer object; shader is shader object.
These are part of later versions of OpenGL.

4) For better performance with win32_gdi, try setting the display to 16 bit in the OS system manager.

Other links in PTC Community:

Creo may not support Display Link see http://www.displaylink.com/support/ticket.php?id=199

Creo may not support AMD Radeon X1300, esp Win 7

Creo may not support ATI Radeon X1950Pro http://communities.ptc.com/thread/37833

Creo may not support ATI Mobility FireGL V5200 see creo parametric 2.0 won't load | PTC Community

Creo may not support ATI Radeon 9600 Pro http://communities.ptc.com/thread/52085

Creo may not support ATI Radeon HD 5650 http://communities.ptc.com/thread/53983

Creo may not support ATI Radeon Xpress 1100 see creo parametric 2.0 won't load | PTC Community

Creo may not support Nvidia geforce GTX550 http://communities.ptc.com/thread/58258

Creo may not support Nvidia geforce GTX 285M http://communities.ptc.com/thread/41068

Creo may not support Nvidia geforce gtx 660m http://communities.ptc.com/thread/42192

Creo may not support Nvidia Quadro K1100M http://communities.ptc.com/thread/56289

Creo may not support Intel 4400 below Creo 3 M010 see http://communities.ptc.com/thread/49896

Creo may not support Intel Embedded Graphics http://communities.ptc.com/thread/56357

Creo may not support Intel HD 4000 see http://communities.ptc.com/thread/52279

Creo may not support Intel HD Graphics 3000 see http://communities.ptc.com/thread/39759

Creo may not support Lenovo T60 http://communities.ptc.com/thread/40334

Creo may not support MacBook Pro (Retina http://communities.ptc.com/thread/59187

Creo may not support Netmeeting on OpenGL, does on win32_gdi http://communities.ptc.com/thread/1984

Creo may not support Nvidia nView Desktop Manager http://communities.ptc.com/thread/33357

Creo may not support Sapphire ATI HD 5970 OC see http://communities.ptc.com/thread/37682

Creo may not support Windows 7 Home Premium http://communities.ptc.com/thread/50468

Creo 2 M080 may not support Quadro/OpenGL - unusual instance - http://communities.ptc.com/thread/41485


View solution in original post

3 REPLIES 3
dschenken
21-Topaz I
(To:fpecout)

Without more info, here's something to start with to diagnose the problem:

1) Update display drivers

Make a Restore Point, or full backup before updating graphics drivers
Make sure you understand how to use the Restore Point or backup to restore your operating system and data
Look for drivers from the makers of the computer first, then the maker of the card, finally from the maker of the operating system
Note: sometimes the most compatible graphics driver version is not the latest version. Be prepared to look for and try older versions.

For AMD/ATI cards try http://support.amd.com/us/gpudownload/Pages/index.aspx (external link)

2) Avoid using hardware acceleration
Mostly avoided by setting the config option "graphics win32_gdi"
Alternatively try "graphics d3d" for Creo 1, Creo 2, Creo 3

Also possible to add startup command option
1. Right Click on software (Creo) shortcut icon > Properties
2. Click in Target path and move cursor to extreme right (at the end of .....exe")
3. Add a space after .exe"
4. Type -g:win32_gdi > Apply > Ok

3) Use hardware acceleration, but disable some features (try one at a time)
May also benefit from the following config options, Creo Parametric 2.0 M090 and higher:
enable_opengl_fbo no
enable_opengl_vbo no
enable_opengl_shader no
ref http://communities.ptc.com/message/244856#244856 (external link)
Note: fbo = frame buffer object; vbo = vertex buffer object; shader is shader object.
These are part of later versions of OpenGL.

4) For better performance with win32_gdi, try setting the display to 16 bit in the OS system manager.

Other links in PTC Community:

Creo may not support Display Link see http://www.displaylink.com/support/ticket.php?id=199

Creo may not support AMD Radeon X1300, esp Win 7

Creo may not support ATI Radeon X1950Pro http://communities.ptc.com/thread/37833

Creo may not support ATI Mobility FireGL V5200 see creo parametric 2.0 won't load | PTC Community

Creo may not support ATI Radeon 9600 Pro http://communities.ptc.com/thread/52085

Creo may not support ATI Radeon HD 5650 http://communities.ptc.com/thread/53983

Creo may not support ATI Radeon Xpress 1100 see creo parametric 2.0 won't load | PTC Community

Creo may not support Nvidia geforce GTX550 http://communities.ptc.com/thread/58258

Creo may not support Nvidia geforce GTX 285M http://communities.ptc.com/thread/41068

Creo may not support Nvidia geforce gtx 660m http://communities.ptc.com/thread/42192

Creo may not support Nvidia Quadro K1100M http://communities.ptc.com/thread/56289

Creo may not support Intel 4400 below Creo 3 M010 see http://communities.ptc.com/thread/49896

Creo may not support Intel Embedded Graphics http://communities.ptc.com/thread/56357

Creo may not support Intel HD 4000 see http://communities.ptc.com/thread/52279

Creo may not support Intel HD Graphics 3000 see http://communities.ptc.com/thread/39759

Creo may not support Lenovo T60 http://communities.ptc.com/thread/40334

Creo may not support MacBook Pro (Retina http://communities.ptc.com/thread/59187

Creo may not support Netmeeting on OpenGL, does on win32_gdi http://communities.ptc.com/thread/1984

Creo may not support Nvidia nView Desktop Manager http://communities.ptc.com/thread/33357

Creo may not support Sapphire ATI HD 5970 OC see http://communities.ptc.com/thread/37682

Creo may not support Windows 7 Home Premium http://communities.ptc.com/thread/50468

Creo 2 M080 may not support Quadro/OpenGL - unusual instance - http://communities.ptc.com/thread/41485


Hi, Thank you so much i simply followed this step:

1. Right Click on software (Creo) shortcut icon > Properties

2. Click in Target path and move cursor to extreme right (at the end of .....exe")

3. Add a space after .exe"

4. Type -g:win32_gdi > Apply > Ok


And it worked immediately. Does that mean i don't have to do anything else and if so is it possible that you could do it for me using team viewer i'm really bad at creo things to do with graphics

dschenken
21-Topaz I
(To:fpecout)

win32_gdi bypasses the hardware acceleration for graphics.

Further options are:

1) to use as-is, it won't hurt, but may be slower than with the hardware acceleration.

2) change the graphics driver for the hardware you do have; sometimes the latest version works, sometimes an earlier one is more compatible.

3) if those aren't OK, then get a compatible graphics accelerator

For more help you'll need to be more specific about the OS version and the graphics card, Not that I know which work together, but I have seen certain ones, particularly laptops with Intel accelerators, have more reported problems.

Top Tags