cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Help us improve the PTC Community by taking this short Community Survey! X

Breakdown of formula

jkrulak
1-Newbie

Breakdown of formula

Hello everybody,

could you help me with this problem in MatCad 14: I do not know how is possible to breakdown formula.

For example:

a=5m

b=5m

(mathcad write formula like this ) A=a.b=25m2

I would be want to write formula like this, without manul write formula: A=a.b=5m.5m=25m2

Thank you

1 ACCEPTED SOLUTION

Accepted Solutions
ViktorKorobov
13-Aquamarine
(To:jkrulak)

Use symbolics command explicit:

explicit.GIF

Viktor

Viktor

View solution in original post

19 REPLIES 19
ViktorKorobov
13-Aquamarine
(To:jkrulak)

Use symbolics command explicit:

explicit.GIF

Viktor

Viktor

Thank you

Step-by-step:

http://twt.mpei.ac.ru/ochkov/Mathcad_14/Chapter1/1_018_All_Values_Step_by_Step.png

you are perfect man, thank you so much

Jan Krulak wrote:

you are perfect man, thank you so much

Thanks!

But the explicit operator of Mathcad is not perfect (with unit for example) and we must sometime or all time do so

http://twt.mpei.ac.ru/ochkov/Mathcad_14/Chapter1rus/19.png

Hello Sir,

thank you for your help. I have ono question for you if you have time: please, how do you do finaly equal? When i press eaqual sign, It allways write the breakdown formula. I marked my problem in the picture. Thank you

1_018_All_Values_Step_by_Step.png

explicit.png

Try please a sheet in attach!

I'm so sorry that I bother you but it is not working . Probably i have some settings wrong, i don´t know what´s wrong with my mathcad. I opened your mathcad and still same mystake. I made shotscreen of mathcad.

Probably you will be know what´s wrong. Thank you

ED.png

Sorry, but you have old version of Mathcad 15 and must upgrade it

SEe too http://communities.ptc.com/message/190243

Valery Ochkov wrote:

Sorry, but you have old version of Mathcad 15 and must upgrade it

Hmm. I'm not so sure that's the problem. I only have M15 F000 installed and I get the following:

Explicit.PNG

Alan

AlanStevens wrote:

Valery Ochkov wrote:

Sorry, but you have old version of Mathcad 15 and must upgrade it

Hmm. I'm not so sure that's the problem. I only have M15 F000 installed and I get the following:

Explicit.PNG

Alan

Sorry, I think Jan has Mathcad 14.

I have this problem with Mathcad Callculation Server 14.

The PTC company sold me MCS 14 per $ 15,000 and does not want to correct this error. And then the company generally refused to support those who bought MCS. Here is "a discreet service"!

Try please http://twt.mpei.ac.ru/MCS/Worksheets/test.xmcd

Valery Ochkov wrote:

Sorry, I think Jan has Mathcad 14.

I have this problem with Mathcad Callculation Server 14.

Ok. I didn't try it on M14.

Alan

Thank you for your help

Jan Krulak wrote:

Thank you for your help

You welcome!

But what version do you have - 14 or 15?

I had 14 but I just ordered mathcad 15 version. I hope it is gonna to be work.

Good luck - veľa šťastia - удачи!

Hello,

i have next troubles with mathcad if you have time. I have three problems:

The first is: how i can change the unit in formula. It always change on predefined units.

The next problem is: how can i round the number in formula. It give me on 12 decimal point.

And the last is: when i have too long formula it write me to the edge. Is possible to follow fixed edge?

Thank you

Jan Krulak wrote:

Hello,

i have next troubles with mathcad if you have time. I have three problems:

The first is: how i can change the unit in formula. It always change on predefined units.

The next problem is: how can i round the number in formula. It give me on 12 decimal point.

And the last is: when i have too long formula it write me to the edge. Is possible to follow fixed edge?

Thank you

See http://communities.ptc.com/message/190243#190243

Thank you again

Top Tags