cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Did you get an answer that solved your problem? Please mark it as an Accepted Solution so others with the same problem can find the answer easily. X

Building Structural Design - Continous Beams: Flexural Reinforcement

TudorMarin
1-Newbie

Building Structural Design - Continous Beams: Flexural Reinforcement

Chapter 3: Reinforced Concrete Slabs and Beams, Part 3

3.3a.jpg     3.3b.jpg     3.3c.jpg

Description:

          This application calculates bending moments for continuous rectangular or T-shaped beams using ACI coefficients and determines the required number and size of reinforcing bars.  Intermediate values calculated include the service and factored loads per unit length of beam, minimum beam width for bottom bars placed in a single layer, and maximum beam width for crack control. The application uses the strength design method of  ACI 318-89.

Next: Chapter 3, Part 4Previous: Chapter 3, Part 2

         

0 REPLIES 0
Top Tags