We have some users from another division who are using dell M6500
laptops with ATI FirePro M7820 cards (Windows 7 + Creo EP 5.0 M140 -
M150).
They have major performance problems when zooming in drawing mode.
Even with a very simple part in the drawing if you zoom in it hits a
point where proe gets terribly sluggish.
It is a really annoying problem when placing dimensions or other actions
where you need to zoom in for selection...
When working in model mode, even in the sketcher performance is good, it
seems drawing related.
Anyone else have experience with this problem or with these cards?
Or suggestions to try and resolve this?
Thanks,
Frederic
DISCLAIMER:
Unless indicated otherwise, the information contained in this message is privileged and confidential, and is intended only for the use of the addressee(s) named above and others who have been specifically authorized to receive it. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message and/or attachments is strictly prohibited. The company accepts no liability for any damage caused by any virus transmitted by this email. Furthermore, the company does not warrant a proper and complete transmission of this information, nor does it accept liability for any delays. If you have received this message in error, please contact the sender and delete the message. Thank you.
This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
