cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Did you get an answer that solved your problem? Please mark it as an Accepted Solution so others with the same problem can find the answer easily. X

Activate section when sketching

wnicsir
3-Visitor

Activate section when sketching

Hi all,

 

I'm just wandering if there's a way to activate a section while in the middle of sketching? Sometimes I already sketch something and realized that I need a reference from the cross section. It's such a bummer to leave the sketch and having to activate the section view. I've tried but couldn't find any. I just want to check if it's a dead end from the Creo part or I'm missing something.

 

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions

Your desire is not a function of Creo.  But I feel for you.

View solution in original post

3 REPLIES 3
Mahesh_Sharma
22-Sapphire I
(To:wnicsir)

I think you can activate the X section first and later create sketch. I am referring Creo 4.0

Your desire is not a function of Creo.  But I feel for you.

Your question is poorly defined.

If you're working in the sketcher you are sketching on a plane. You have immediate access, there and then, to any other model entity, at any depth, on either side of the sketching plane.

Top Tags