cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Want the oppurtunity to discuss enhancements to PTC products? Join a working group! X

Creating angled weld part

ptc-5197663
3-Visitor

Creating angled weld part

Hello!

I am trying to create a weld part(no weld feature) the problem in it is, it has a different profile and angled guidance line so need an easy way to create it...Does anybody have any idea?

1.pngall dimensions are in mm

it can be done in swept blend with 8 points different sketch. Is there any other way to make it easy especially the radius (not round) at the corner is not easy...

If anything is not understood then please let me know...

Thank you.


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions

You need to look for how to use the evalgraph(<graphname>) in the sketch relations.

You have to predefine the graph as a feature. In this case, you need 2 graphs, one for the horizontal leg and one for the vertical.

View solution in original post

3 REPLIES 3

Use graphs to manage the horizontal and vertical legs of the weld using a variable section sweep.

"When you want to do something difficult, there simply is no easy way to do it." - abd

Hey I have tried today, there is no graph in variable section sweep. Could you please tell more in detail?

You need to look for how to use the evalgraph(<graphname>) in the sketch relations.

You have to predefine the graph as a feature. In this case, you need 2 graphs, one for the horizontal leg and one for the vertical.

Top Tags