cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Creo 3 - Strange behaviour - 2

SOLVED
Amethyst

Creo 3 - Strange behaviour - 2

Hi,

 

would you please explain to me why Creo behaves so strangely?

 

I have created a simple flange:

 

190103-05.png

 

Edited:

190103-07.png

 

 

and re-created it in Onshape - just for comparison :

 

190103-06.png

 

Edited:

 

190103-08.png

 

regards.

Arek

Creo 3 user
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Creo 3 - Strange behaviour - 2

The default bend relief is rip, creating a sliver because the flange is on an angled edge.  Change the relief to eliminate the sliver.  No relief would work well on the shown part.

Capture.JPG

 

 


Creo is an endless adventure: I have learned, created and shared. I will continue learning, creating and sharing,.
2 REPLIES 2
Highlighted

Re: Creo 3 - Strange behaviour - 2

Another screenshot showing the issue:

190103-09.png

 

regards,

Arek

Creo 3 user
Tags (1)

Re: Creo 3 - Strange behaviour - 2

The default bend relief is rip, creating a sliver because the flange is on an angled edge.  Change the relief to eliminate the sliver.  No relief would work well on the shown part.

Capture.JPG

 

 


Creo is an endless adventure: I have learned, created and shared. I will continue learning, creating and sharing,.