cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Did you get an answer that solved your problem? Please mark it as an Accepted Solution so others with the same problem can find the answer easily. X

Custom Secondary Units

ddietz-2
1-Newbie

Custom Secondary Units

I have an instance where I have created a custom unit system in 40mm increments (1 unit = 40mm).  In dual dimensioning, I can set that unit system as primary and the secondary system as inches, but what I need is really inches primary and 40mm units secondary as the numerous measurement features in the model reporting to notes need to be output in inches.  The .dtl options appear to only accept the fixed options mm, inch, foot, cm, and m for secondary units.  Why are the secondary units limited to pre-set options, and is there a way to circumvent this?


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 REPLY 1

There are operations you can do in relations to make numeric variables which can be added using annotations.

Generally, yes, there is a lot of pre-defined stuff.  I am not sure at what level this is managed in Creo.

If you have maintenance, you can create an idea in the dead letter box we call "Ideas"

Top Tags