cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Drawing axis orientation

SOLVED
Highlighted
Aquamarine

Drawing axis orientation

Hello all,

 

A question about drawings. Why hole axis are always orientend horizontal/vertical independently the way we created the holes ?

On the capture below as you can see hole axis are always horizontal/vertical. I would like to have axis orientend like the view on the right but on the left view. Is it possible ? Thanks

Capture_orientation_axes.PNG

Tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Drawing axis orientation

You'll have to manually manipulate the axis by selecting the axis, right mouse button, edit attachment, and then in the old menu manager dialog, choose the option that will work the best for you. If you know the angle, you can manually enter it or you can have the axis orient parallel or normal to another picked line/edge or you can make the axis go thru other geometry.


Steve Williams
Pro/E Version 15/16 (Circa 1995/1996)

View solution in original post

2 REPLIES 2

Re: Drawing axis orientation

You'll have to manually manipulate the axis by selecting the axis, right mouse button, edit attachment, and then in the old menu manager dialog, choose the option that will work the best for you. If you know the angle, you can manually enter it or you can have the axis orient parallel or normal to another picked line/edge or you can make the axis go thru other geometry.


Steve Williams
Pro/E Version 15/16 (Circa 1995/1996)

View solution in original post

Highlighted

Re: Drawing axis orientation

Thanks Stephen, it works juste fine !!

Announcements