cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Did you know you can set a signature that will be added to all your posts? Set it here! X

Extrude related problem

nsrivastava
6-Contributor

Extrude related problem

I want to add an  Extrude of 10 mm at the bottom of the model without affecting the openings created with shell command present below.  In Creo, there is no multi body function so I am unable to do so. Please guide me how to do it in Creo 4.0

23.jpg2.jpg

3 REPLIES 3

Can you elaborate on what you are trying to do?  I assume that the bottom is the 3 rectangular openings.  Assuming they are coplanar, you can extrude on that plane and lengthen those openings pretty easily.  But it seems like you are trying to do something else.  Please clarify.

--
Doug Schaefer | Experienced Mechanical Design Engineer
LinkedIn

I managed to create it. First I extruded the rectangle then created the cavity along the previous shell using the Blend tool. 

 1.jpg11.jpg

Ah, this makes more sense now.

 

Regarding your original approach, the extrude could have been made as a capped surface, the internal surfaces of the 3 outlets copied and extended, the copied surfaces merged with the extruded surface and then solidified.

--
Doug Schaefer | Experienced Mechanical Design Engineer
LinkedIn
Top Tags