cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

How to reference BOM Table repeat region quantity in a note?

Highlighted
Regular Member

How to reference BOM Table repeat region quantity in a note?

Hi All,

 

How would one parametricly show the quantity of one component in a BOM repeat region in a separate note at the same time on a drawing?  FYI, The part in question not part of a pattern. Just assembled multiple times in different locations.

For instance if I had work instructions on a drawing sheet and wanted to say

Notes:

1.  Apply lube A458-63 to 89568-456 quantity x before torquing to 30 ft lbs 

 

How would I call out the quantity for a part used in a assembly in a drawing note parametricly?

 

Thanks for any help you can provide,

Don Anderson

1 REPLY 1
Highlighted

Re: How to reference BOM Table repeat region quantity in a note?

BOM parameters are not available outside the BOM.

Lube would be entered as A/R quantity in our BOM as it would be a bulk item.

We put both item number balloons on the item that gets the lube.

Our note would say: Apply lube A458-63 to 89568-456 before torquing to 30 ft lbs 

 

Announcements