cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Problems Creating a Bevel Groove Weld

SOLVED
Highlighted
Regular Member

Problems Creating a Bevel Groove Weld

weld.JPGAs shown in the picture above, I have no problems creating fillet welds and bevel groove welds when parts butt together as shown in the attachment.

 

But I can't get it to add a bevel groove weld when 2 parts "tee" into each other. If you reference the picture you can see that I had no issues with creating the edge prep for this weld. But I can't get it to create the bevel groove weld for the parts that "tee" together. Using the "location" tab I think I've selected every combination of surfaces and edges but still having problems.

 

If anybody has some helpful advice please let me know.

 

Thanks, Steve

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Problems Creating a Bevel Groove Weld

@sducotey-2 

You may try create a curve on one of the surfaces and use that as location and for other side use edge something as in image  

 

 

View solution in original post

2 REPLIES 2

Re: Problems Creating a Bevel Groove Weld

@sducotey-2 

You may try create a curve on one of the surfaces and use that as location and for other side use edge something as in image  

 

 

View solution in original post

Highlighted

Re: Problems Creating a Bevel Groove Weld

Your suggestion is the solution. Thank you.

Announcements
LiveWorx Call For Papers Happening Now!