cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Stay updated on what is happening on the PTC Community by subscribing to PTC Community Announcements. X

Sweep Surface Question

ArekTRI
12-Amethyst

Sweep Surface Question

Hi Creoes,

I have a question how to create a surface using only 2 splines - one for shape and other for trajectory?

It is possible in other CADs but Creo.

Thank you,

Arek

 

Creo Surface issue.png

 

Creo 3 user
1 ACCEPTED SOLUTION

Accepted Solutions

Hi,

using sweep options you can create geometry whose sections are not perpendicular to the trajectory.

sweep_options.png


Martin Hanák

View solution in original post

4 REPLIES 4

Hi,

I uploaded test model. Look at it.


Martin Hanák

Hi @MartinHanak 

 

Really helpful attachment.

 

Another issue (for me) is, Sweep command forces to create the perpendicular section to the trajectory line/spline what gives a different result.

 

In SW/Onshape or different CADs, it is possible. Onshape below.

Onshape - 01.png

 

Anyway, thank you very much.

Regards,

Arek

 

 

Creo 3 user

Hi,

using sweep options you can create geometry whose sections are not perpendicular to the trajectory.

sweep_options.png


Martin Hanák

Hi @MartinHanak 

 

Thank you,

 

Regards,

Arek

Creo 3 user
Top Tags