cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Tutorial: Sheet Metal Conversion - two examples

Re: Tutorial: Sheet Metal Conversion - two examples

@VladimirPalffy and others,

 

I finally fixed it by adding a cut-revolve in the problematic corner... Smiley Very Happy

 

Creo_Flange_Fix.png

Re: Tutorial: Sheet Metal Conversion - two examples

I see that you fixed it below, but I meant add the round to the solid before it's converted to sheet metal, not before the conversion feature.

--
Doug Schaefer | Engineering Manager
Crow Works
Highlighted

Re: Tutorial: Sheet Metal Conversion - two examples

I have tried adding rounds to the solid (before the first shell, and after the first shell), but I still could not convert it (see my reply on the first page).

 

Adding a round to that edge also creates problems with the "bottom inner flange".

 

Thanks for the suggestion though!