cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

call family table instance with pro/programs

SOLVED
Regular Member

call family table instance with pro/programs

hello everyone,

i want to replace  *.prt with pro/programm from family table

but this *.prt is generic it have a family table

how can i replace?

2.JPG

1.JPG

Best Regards,

Cömert YILMAZ

1 ACCEPTED SOLUTION

Accepted Solutions

Re: call family table instance with pro/programs

If you know the name of the instance you want to place, it's easy...

Put this in your RELATIONS (or use an INPUT PARAMETER)

MY_INSTANCE = "510FB0158_1"

Then open your PRO/PROGRAM and look where the current part is being placed.

ADD PART 510FB0_158_159_160

...

END ADD

Now replace "510FB0_158_159_160" with "(MY_INSTANCE)"

ADD PART (MY_INSTANCE)

..

END ADD

Now change the value of MY_INSTANCE 🙂

When this succeeds, you could also look into the "lookup_inst" function...but that's a whole different ballgame

View solution in original post

7 REPLIES 7

Re: call family table instance with pro/programs

See Creo Parametric Help Center Example: A Parametric Design for a Blender Cover

Re: call family table instance with pro/programs

Re: call family table instance with pro/programs

If you know the name of the instance you want to place, it's easy...

Put this in your RELATIONS (or use an INPUT PARAMETER)

MY_INSTANCE = "510FB0158_1"

Then open your PRO/PROGRAM and look where the current part is being placed.

ADD PART 510FB0_158_159_160

...

END ADD

Now replace "510FB0_158_159_160" with "(MY_INSTANCE)"

ADD PART (MY_INSTANCE)

..

END ADD

Now change the value of MY_INSTANCE 🙂

When this succeeds, you could also look into the "lookup_inst" function...but that's a whole different ballgame

View solution in original post

Re: call family table instance with pro/programs

thank you so much  for help

Re: call family table instance with pro/programs

No problem.

If you want to know more about the lookup_inst then just give a shout 🙂

Highlighted

Re: call family table instance with pro/programs

Hi TeunHam,

i don't know lookup_ins or what does it .

but i have i problem .

i have two parts and there are generic part. (510FB0161.ASM and 510FB0166_167_168.ASM)

if my chose 510FB0161_1 i want to the suppress 510FB0166_167_168.ASM

or

if my chose 510FB0166_1 i want to the suppress 510FB0161.ASM

1.JPG

2.JPG

you can see program;

VERSION 3.0
REVNUM 474
LISTING FOR ASSEMBLY S1_FAN_OMEGA

INPUT
S1_OMEGA_TIPI NUMBER
"OMEGA TİPİNİ SEÇİNİZ. ( 1=SINGLE , 2=DUAL )"
S1_HAVA_AKIS_YONU NUMBER
"HAVA AKIŞ YÖNÜ SEÇİNİZ. ( 1=SAĞ , 2=SOL )"
S1_TEK_PARCA_FB_SINGLE STRING
"FB KODUNU GİRİNİZ.(510FB0161_...)"
S1_PARCALI_FB_SINGLE STRING
"FB KODUNU GİRİNİZ.(510FB0166_.,510FB0167_.,510FB0168_.)"
S1_TEK_PARCA_FB_DUAL STRING
"FB KODUNU GİRİNİZ.(510FB0152_...)"
S1_IKI_PARCALI_FB_DUAL STRING
"FB KODUNU GİRİNİZ.(510FB0157_...)"
S1_PARCALI_FB_DUAL STRING
"FB KODUNU GİRİNİZ.(510FB0163_.,510FB0164_.,510FB0165_.)"
END INPUT

RELATIONS
WEIGHT=PRO_MP_MASS
END RELATIONS


ADD FEATURE (initial number 1)
INTERNAL FEATURE ID  1


DATUM PLANE

  NO.     ELEMENT NAME    INFO                                                 
  ---     -------------   -------------                                        
   1      Feature Name    Defined                                              
   2      Constraints     Defined                                              
   2.1    Constraint #1   Defined                                              
   2.1.1  Constr Type     X Axis                                               
   3      Flip Datum Dir  Defined                                              
   4      Fit             Defined                                              
   4.1    Fit Type        Default                                             

NAME = ASM_RIGHT

    FEATURE IS IN LAYER(S) :
      01__ASM_ALL_DTM_PLN - OPERATION = SHOWN
      01__ASM_DEF_DTM_PLN - OPERATION = SHOWN

END ADD


ADD FEATURE (initial number 2)
INTERNAL FEATURE ID  3


DATUM PLANE

  NO.     ELEMENT NAME    INFO                                                 
  ---     -------------   -------------                                        
   1      Feature Name    Defined                                              
   2      Constraints     Defined                                              
   2.1    Constraint #1   Defined                                              
   2.1.1  Constr Type     Y Axis                                               
   3      Flip Datum Dir  Defined                                              
   4      Fit             Defined                                              
   4.1    Fit Type        Default                                             

NAME = ASM_TOP

    FEATURE IS IN LAYER(S) :
      01__ASM_ALL_DTM_PLN - OPERATION = SHOWN
      01__ASM_DEF_DTM_PLN - OPERATION = SHOWN

END ADD


ADD FEATURE (initial number 3)
INTERNAL FEATURE ID  5


DATUM PLANE

  NO.     ELEMENT NAME    INFO                                                 
  ---     -------------   -------------                                        
   1      Feature Name    Defined                                              
   2      Constraints     Defined                                              
   2.1    Constraint #1   Defined                                              
   2.1.1  Constr Type     Z Axis                                               
   3      Flip Datum Dir  Defined                                              
   4      Fit             Defined                                              
   4.1    Fit Type        Default                                             

NAME = ASM_FRONT

    FEATURE IS IN LAYER(S) :
      01__ASM_ALL_DTM_PLN - OPERATION = SHOWN
      01__ASM_DEF_DTM_PLN - OPERATION = SHOWN

END ADD


ADD FEATURE (initial number 4)
INTERNAL FEATURE ID  7
TYPE = COORDINATE SYSTEM
NAME = ASM_DEF_CSYS


    FEATURE IS IN LAYER(S) :
      05__ASM_ALL_DTM_CSYS - OPERATION = SHOWN
      05__ASM_DEF_DTM_CSYS - OPERATION = SHOWN

END ADD

IF S1_OMEGA_TIPI==2
     ADD SUBASSEMBLY S1_OMEGA_DUAL
     INTERNAL COMPONENT ID 40
     END ADD
END IF

IF S1_OMEGA_TIPI==1
     ADD SUBASSEMBLY S1_OMEGA_SINGLE
     INTERNAL COMPONENT ID 49
     END ADD
END IF

IF S1_OMEGA_TIPI==1
     IF S1_HAVA_AKIS_YONU==2

         ADD SUBASSEMBLY (S1_TEK_PARCA_FB_SINGLE)
         INTERNAL COMPONENT ID 60
         PARENTS = 49(#5)
         END ADD

        ADD SUBASSEMBLY (S1_PARCALI_FB_SINGLE)
         INTERNAL COMPONENT ID 63
         PARENTS = 49(#5)
         END ADD
     END IF

     IF S1_HAVA_AKIS_YONU==1
         ADD SUBASSEMBLY (S1_TEK_PARCA_FB_SINGLE)
         INTERNAL COMPONENT ID 68
         PARENTS = 49(#5)
         END ADD

         ADD SUBASSEMBLY (S1_PARCALI_FB_SINGLE)
         INTERNAL COMPONENT ID 73
         PARENTS = 49(#5)
         END ADD
     END IF
END IF

IF S1_OMEGA_TIPI==2
     IF S1_HAVA_AKIS_YONU==2
         ADD SUBASSEMBLY (S1_TEK_PARCA_FB_DUAL)
         INTERNAL COMPONENT ID 76
         PARENTS = 40(*)
         END ADD

         ADD SUBASSEMBLY (S1_IKI_PARCALI_FB_DUAL)
         INTERNAL COMPONENT ID 83
         PARENTS = 40(*)
         END ADD

         ADD SUBASSEMBLY (S1_PARCALI_FB_DUAL)
         INTERNAL COMPONENT ID 88
         PARENTS = 40(*)
         END ADD
     END IF

     IF S1_HAVA_AKIS_YONU==1
         ADD SUBASSEMBLY (S1_TEK_PARCA_FB_DUAL)
         INTERNAL COMPONENT ID 93
         PARENTS = 40(*)
         END ADD

         ADD SUBASSEMBLY (S1_IKI_PARCALI_FB_DUAL)
         INTERNAL COMPONENT ID 98
         PARENTS = 40(*)
         END ADD

         ADD SUBASSEMBLY (S1_PARCALI_FB_DUAL)
         INTERNAL COMPONENT ID 103
         PARENTS = 40(*)
         END ADD
     END IF
END IF

MASSPROP
END MASSPROP

Re: call family table instance with pro/programs

For doing this, do I need aax extension?
In my creo I don't have the aax extension, but I'm able to open and edit Pro program.

I know it's out of context but I still haven't figure out, what aax unlocks.
Announcements
LiveWorx Call For Papers Happening Now!