cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Stay updated on what is happening on the PTC Community by subscribing to PTC Community Announcements. X

extrude up to multiple surfaces

jmeyerson
1-Newbie

extrude up to multiple surfaces

Is there a way to extrude a feature up to a surface created by two planes? I created a surface which looks like a V in the top plane, and then tried to extrude up to this surface, but it will only extrude up to one of the planes. I would like to complete the extrude using only 1 extrude, not come back and trim or do aother extruded cut. See attached file for what I was able to do. Thanks


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions

You can try this:

When defining side, select the surface as quilt (Set Quilt in smart filter).

Extrude1.png

Result will be:

Extrude.png

View solution in original post

4 REPLIES 4

You can try this:

When defining side, select the surface as quilt (Set Quilt in smart filter).

Extrude1.png

Result will be:

Extrude.png

Thanks, that is exactly what I wanted.

Glad to help you Steve.

Does the "Quilt" have to be a surface or could it be existing solid geometry?

Top Tags