cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Components disappear from model tree 2

Highlighted
Newbie

Components disappear from model tree 2

First, I'm sorry for the way the original of this question was written. But, I let an Admin. want-a-be write it using my log on. (Yea I know but it's friday and I've got wasy over 70 in for the week and no end in sight.)

Using Pro/E 2001
ILink 3.2
Routing Hyd hoses.

And yes suppressed objects are shown in the modeltree.
He has cleared the CRC's. And there is no Pro/Program in these models.

One of my users has a Hyd. Assy that has 3 hose routings in it. He has P-clamps lower in the model tree than the hoses. and a bolt that is in the tree between the hoses and the p-clamp. The bolt was in from another clamp that was removed and the bolt was fixed in place. The bolt was reordered to the bottom of the model tree then redefined to be placed in the new p-clamp. As soon as redefine was selected the 3 hyd routings disappear from the model and the model tree. After the redefine was completed the routings do not reapear. They are not supressed they are just not there.

Marshall Sexton