cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Did you get an answer that solved your problem? Please mark it as an Accepted Solution so others with the same problem can find the answer easily. X

How to find assembly cut

Isaac__
3-Visitor

How to find assembly cut

Hi,

I have an assy model which gives me the warning: ASSEMBLY CUT is entirely outside the model; model unchanged.

I can't seem to find the assy cut in my model tree (quite large). Does it have to reside in the top level assy or could the problem originate from an assy cut in a sub assy?

Is there any way to find the feature number of the cut from the display log from which the warning occurs?

Many thanks,

Rohan (WF4)


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions

Rohan,

try opening trail file in Notepad and search for "ASSEMBLY CUT is entirely outside the model; model unchanged". Maybe you can find some valuable information.

Martin Hanak


Martin Hanák

View solution in original post

5 REPLIES 5

Rohan,

try opening trail file in Notepad and search for "ASSEMBLY CUT is entirely outside the model; model unchanged". Maybe you can find some valuable information.

Martin Hanak


Martin Hanák

Hi Martin,

Very useful tip! Allows me to see what sub-assy/part ProE was attempting to regen at the time the error occured.

Thanks very much

dgschaefer
21-Topaz II
(To:Isaac__)

It could be in that assembly or a subassy.

I assume that you have features displayed in your model tree?

--
Doug Schaefer | Experienced Mechanical Design Engineer
LinkedIn

Turn on features in the assembly tree and expand all

Use the search tool.

Feature/Feature/type/category: All/Value: Extruded (or revolved)/Find now.

As you highlight the found items in the search tool, they will highlight in the tree.

Hi Antonius,

Thanks for your suggestion. I hadn't really used the search tool previously so thanks for opening my eyes to it's potential.

Cheers

Top Tags