cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Your Friends List is a way to easily have access to the community members that you interact with the most! X

Lifting contacts with Creo Simulation

Ozzie
3-Visitor

Lifting contacts with Creo Simulation

Hey guys!

 

I am new at the forum and have a problem

with simulating the flat theory and edge

moments in Creo Simulate 4.0. For the

theoretically background, see picture 1.

The goal is, to get the plate corners in minus

z-direction. We already simulated it in

ANSYS (see picture 2), but I want to see

the same with Creo. Already I used

Interfaces, searched for something similar

in other forums or books, but don’t found anything.Forum_Anfrage_preview.pnglösung ansys.jpg

Creo don´t show me the lifting corners.

 

2.PNG

 

Hopefully you can help me with it!

Thank you in advance!

1 ACCEPTED SOLUTION

Accepted Solutions
skunks
18-Opal
(To:Ozzie)

1 REPLY 1
skunks
18-Opal
(To:Ozzie)

example attached

Top Tags