cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Want the oppurtunity to discuss enhancements to PTC products? Join a working group! X

Creo 3.0 Surface Free Form

CoreySusie
12-Amethyst

Creo 3.0 Surface Free Form

What happened to the Surface Free Form and Solid Free Form commands in Creo 3.0?  Is there a config or hidden config to bring them back?

 

It was available in Creo 2.0

 

Is there a new equivalent version of this feature?


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
ACCEPTED SOLUTION

Accepted Solutions

Hi Corey,

It appears that these options have been obsoleted in Creo Parametric 3.0, but you can still access them by setting the config option enable_obsoleted_features to yes.  Once you do that, you will be able to search for Surface Free Form and Solid Free Form in the Command Search or add them to a user-defined tab from the Customize Ribbon.

You can get more information via the following article:

CS180186 - Surface Free Form command under Model > Surface is not available in Creo Parametric 3.0

If you don't have a user name and password to login, you can create one here.

Thanks,

Amit

View solution in original post

1 REPLY 1

Hi Corey,

It appears that these options have been obsoleted in Creo Parametric 3.0, but you can still access them by setting the config option enable_obsoleted_features to yes.  Once you do that, you will be able to search for Surface Free Form and Solid Free Form in the Command Search or add them to a user-defined tab from the Customize Ribbon.

You can get more information via the following article:

CS180186 - Surface Free Form command under Model > Surface is not available in Creo Parametric 3.0

If you don't have a user name and password to login, you can create one here.

Thanks,

Amit

Announcements
NEW Creo+ Topics: PTC Control Center and Creo+ Portal


Top Tags