CAD Driven BOM For Parts With Different Colors

[kirkwemple]

Is there a method to configure a CAD driven BOM structure so a component (Qty 3 in CAD assembly) is listed three times as qty 1 for each occurrence so a COLOR usage attribute can be assigned to each?  

[BenLoosli]

In the repeat region, enable Duplicates. This applies to the whole table, so if you have 4 bolts, they will also have 4 lines in the BOM.

The better solution is to utilize a family table with each color being an instance with a unique part number and then put each instance in your assembly. This will give each color part a single line but combine the 4 bolts into a single line.

[kirkwemple]

Thanks for reply, Ben; but my question applies to the structure in PSB, not a repeat region in a drawing.

[joe_morton]

In the Display dropdown, click Show Occurrences:

[anursingh]

Hi @kirkwemple,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Of course, if you have more to share on your issue, please pursue the conversation. 

Thanks,
Anurag