cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Stay updated on what is happening on the PTC Community by subscribing to PTC Community Announcements. X

Creo 8 no search tab in Windchill server

MattPat
14-Alexandrite

Creo 8 no search tab in Windchill server

Hi,

another weird issue after upgrading to PDMLink 11.1 M020. Users moved from Creo 6 to Creo 8.03 and the search tool is not visible in creo parametric. 

MattPat_0-1653913451822.png

 

is it some preferences disabled in creo/windchill? 

 

They have registered windchill server and set a primary server as help center said:

"Search is added to the navigator automatically after you set the primary server in the Server Management dialog box."

 

 

 

ACCEPTED SOLUTION

Accepted Solutions
TomU
23-Emerald IV
(To:MattPat)

The search tab was intentionally removed from Creo 8.0.  From CS353916:

TomU_0-1653992428453.png

 

The line from the help documentation you're quoting is specific to the Windchill Workgroup Manager.  This is different from what is embedded into Creo and is used to connect other 3rd party CAD systems to Windchill.  I believe the search tab is still present there.

View solution in original post

1 REPLY 1
TomU
23-Emerald IV
(To:MattPat)

The search tab was intentionally removed from Creo 8.0.  From CS353916:

TomU_0-1653992428453.png

 

The line from the help documentation you're quoting is specific to the Windchill Workgroup Manager.  This is different from what is embedded into Creo and is used to connect other 3rd party CAD systems to Windchill.  I believe the search tab is still present there.

Announcements


Top Tags