Hello, As can be seen below, my outer dia and inner dia in the part sketch tool are 208.1 and 173.9 respectively. I have then shelled the extruded model. I want to check if the internal di...
For some reason I am not getting an option to be allowed to delete this parameter (which I created like 3 minutes before). Creo can be awfully difficult in the way it handles options and I for the li...
Hello, I am trying to recreate this model from solidworks model mania 2006 which consists of two phases, changing your model from to the one below. Basically adding a taper and a draft...
I would like to make these linkages move together, the easiest way to do this as I think is making the distance from the origin the same for the links (indicated by the lines drawn). However, I am un...
Good morning all! Doing some work in CREO Parametric 8.0.8.0. and after some time I realised that during sketching in a feature the ribbon is gone. I have to click "sketch" again to get all ...
When I right-click, hide the Fill Surface on the model itself, it is no longer interactable even through the model tree. Conversely when doing the same through the model tree itself instead of the mo...
The base shape is this which I created by blending two sketches. I would like to remove the top and bottom surfaces and have differing thickness walls at the top and bottom of this object; as in...
Hello, I am attempting to create three holes in the thickened version of a quilt. The most reliable method I have found is by trimming the quilt as shown below however this results in no hole axis b...