Hi, how do you define the tool for the lathe. I didn't get it from the instructions I tried to create a Solid tool and I added CSYS TIP and CREO doesn't want to create paths even though I increased...
Hello experts I have a question about volume rough seq. Is it possible to add some minimum default radius on every motion change tool path endpoint to avoid sudden motion stop and start for a smooth ...
Hello, I have a question about manufacturing family parts. I have 2 parts ruled by a family table. Simple parts, one with a M8 threaded hole and the other with a 8.4 countersink hole. This is the o...
I imported a lathe tool into Creo parametric 10.1, and whenever I run the simulation, the tool above the workpiece has a distance almost equal to the radius of the insert tip. How can I make the tool...
Hello, Why GPOST does not output the feed rate during NURBS machining ? Attached a new PP completly empty (Postprocessor defaults) and CL file. CREO 7.0.5.0 GPOST V6.8 P20p2-J11 Regards ...
Hello, I am using CREO 5 - manufacturing, I am trying set probe in Manual cycle - CL Command - Menu - PROBE_CYCLES. Has anyone work with this? Thank you for the help
Hello! In Creo NC Complete (5.0.4.0) when I create a new machine code for NC-machine, equations are automatically substituted. CUT_FEED = (CUTTER_DIAM/80)*SPINDLE_SPEED*2 SPINDLE_SPEED = 1...
I am using Creo Parametric Release 5.0 and Datecode5.0.5.0 When I select gohome on Creo it ouputs G0 I need this to output G28 command is there a way to change that? I am currently using Option Fi...
In creo 9.0.4.0, 540*160*5mm size, use mill window + volume rough with Diameter 8mm tool, and then followed by local milling with Diameter 4mm tool to remove residual material ( with pre-sequence in ...
When working a 3d.prt generated in MANUFACTURING-MOLD CAVITY (CREO V 9.0) for mill it, frequently turns "RED" the file pointing to: Extract id 1 REGENERATION FAILED. Q: Why this h...