Creo starts normally but nothing displayed in work window.

[ptc-4754546]

Hi,

Just installed Creo 1.0 (educational edition) as part of my course. I'v installed this on a partitionrunning Windows 7 professional on my Macbook Pro (2011 model) Creo starts normally however when a new part is started absolutely nothing is displayed i.e. planes etc, when a sketch is started still nothing. When a saved part is opened within creo again nothing is displayed. Any suggestions as to what the problem is in this case and if there's a solution?
.

Thanks in adavnce

This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

[JoshH · Accepted solution]

Hi Noel,

while Mac's aren't supported hardware for Creo, I've seen it run with BootCamp and probably one or two other ways.

One thing that may help is to set your graphics performance to win32_gdi

Go to <File>, <Options>, <Configuration Editor>, <Add...>, Graphics, win32_gdi

Good luck,

Josh

[ptc-4754546]

Hi Josh,

Very helpful. That has the problem sorted.

Thank you,

Noel