I am looking for a post that will output 5 axis code like I show below. The post needed would be for a Romeo Engineering 5 axis waterjet machine with a RE-2000 NT controller. The machine is a 2007 vintage. Any help would be appriciated.
Thanks,
Ron
G17 G70 G90
G92 X0. Y0. Z0.
M13
G04 T.5
M12
G04 T.5
G00 Z-.1948
G00 B-24.031 A161.138
G00 X.4498 Y46.8202
M10
G04 T.5
G01 X.4495 Y46.8208 Z-.1967 F166.14
X.5368 Y46.8165 Z-.1975 B-23.5 A163.361 F292.05
X.6267 Y46.8121 Z-.1982 B-23.004 A165.738 F293.26
X.7166 Y46.8077 Z-.199 B-22.553 A168.235 F294.37
X.7948 Y46.8038 Z-.1992 B-22.196 A170.535 F295.24
Y46.7162 Z-.1988 B-22.19 A170.571 F295.25
Y46.6262 F168.72
Y46.5362 F168.72
Y46.4462 F168.72
Y46.3968 Z-.1985 B-22.196 A170.533 F295.24
X.7075 Y46.401 Z-.1976 B-22.598 A167.97 F294.26
X.6176 Y46.4054 Z-.1969 B-23.053 A165.485 F293.14
X.5277 Y46.4098 Z-.1962 B-23.554 A163.121 F291.91
X.4496 Y46.4138 Z-.196 B-24.031 A161.137 F290.74
Y46.5013 Z-.1965 B-24.039 A161.107 F290.73
Y46.5913 F166.13
Y46.6813 F166.13
Y46.7713 F166.13
X.4495 Y46.8208 Z-.1967 B-24.031 A161.138 F290.75
X.4498 Y46.8202 Z-.1948 F747.63
M12
G04 T.5
G00 B-24.028 A161.149
G00 Z-.1948
X.4498 Y46.3282
M10
G04 T.5
G01 X.4495 Y46.3288 Z-.1967 F166.14
X.5368 Y46.3245 Z-.1975 B-23.462 A163.532 F292.14
X.6267 Y46.3201 Z-.1982 B-22.934 A166.099 F293.43
X.7166 Y46.3157 Z-.199 B-22.46 A168.804 F294.59
X.7948 Y46.3118 Z-.1992 B-22.196 A170.534 F295.24
Y46.2242 Z-.1987 B-22.306 A169.787 F294.97
This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
