How can I switch on/off features with "Yes/No"-parameters?
This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
You have to have Pro/Program available to you and you will need to go in to the Relations section and add something similar to this. asm_model_1 is a parameter that you create.
Brian S. Lynn Technical Coordinator, Product Engineering
Actually, you don't HAVE to add/edit any relations whatsoever. You DO need Pro/PROGRAM and a workable parameter. Rui Brian Lynn wrote: You have to have Pro/Program available to you and you will need to go in to the Relations section and add something similar to this. asm_model_1 is a parameter that you create. Brian S. Lynn Technical Coordinator, Product Engineering
Correct, just use an IF section around the feature.
If we are just talking Part Mode, you do have to use Pro/Program but you can use Pro/Program in PART mode with any Pro/E seat. To do ASSEMBLY Pro/Programs you need the AAX license.
Also you can regenerate any program with any seat of Pro/E, whether or not it has AAX.
Best regards,
Kevin Alexander
Senior Application Engineer - TriStar, Inc. TEL: 800-800-1714 x3118