cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Flat view Annotation 18.1 - 19

Highlighted
Marble

Flat view Annotation 18.1 - 19

does anyone know help me? I customized lines of geometry from yellow to white, but the flat view is displayed white.

I do not find a way to customize it ...

1 REPLY 1

Re: Flat view Annotation 18.1 - 19

Do you use basic sheet or SheetMetal?
If you use SheetMetal you have to change the file sha_demoshop.lsp

If you use basic sheet you have to change the file sd_data.lsp because the only way is to change the persitant data.

In this file you will find a section like this:

(persistent-data

:key "BASIC-SHEET-METAL-SHOP"

:value '( Smiley Very HappyEFAULT-MATERIAL-THICKNESS 1 Smiley Very HappyEFAULT-BEND-PROCESS "bends"

           Smiley Very HappyEFAULT-BEND-RADIUS 1 Smiley Very HappyEFAULT-RELIEF-TYPE "rect_relief"

           Smiley Very HappyEFAULT-RELIEF-TOOL ( :WIDTH 1 ) Smiley Very HappyEFAULT-MITER-RELIEF-TYPE

           "miter_chamfer" Smiley Very HappyEFAULT-MITER-RELIEF-TOOL ( Smiley TongueERCT_DEPTH 100 )

           Smiley Very HappyEFAULT-RELIEF-DEPTH 0 Smiley Very HappyEFAULT-CORNER-RELIEF-TYPE

           "min_perp_v_corner_relief" Smiley Very HappyEFAULT-CORNER-RELIEF-TOOL ( :MIN_WIDTH 1 )

           Smiley Very HappyEFAULT-CORNER-GAP 0.1 Smiley Very HappyEFAULT-CHECK-PART T Smiley Very HappyEFAULT-KEEP-WP NIL

           :MATERIALS ( ( 0.5 ) ( 1 ) ( 1.25 ) ( 1.5 ) ( 2 ) ( 3 ) ( 5 ) ) :BENDS ( ( 0.4 ) ( 0.6 ) ( 0.8 ) ( 1 ) ( 1.5 ) ( 2 ) (

           2.3999999999999999 ) ) :RECT-RELIEFS ( ( 0.01 ) ( 1 ) ( 1.6000000000000001 ) ( 2 ) ( 3 ) ( 10 ) ( 20 ) )

           :K-FACTOR 0.4 Smiley FrustratedHOP-UNITS ( 1 :MM ) Smiley Very HappyEFAULT-CORNER-LONG-LIP-OFFSET 0

           Smiley Very HappyEFAULT-CORNER-CONSTELLATION Smiley FrustratedYMMETRIC Smiley FrustratedHARP-BEND-RADIUS 0.4

           :FLAT-DEFAULT-COLOR 16777215 :FLAT-FOLD-UP-COLOR 65535

           :FLAT-FOLD-DOWN-COLOR 65535 :FLAT-TOOL-COLOR 65280 :FLAT-ERROR-COLOR

           16711680 :FLAT-FOLD-UP-LINETYPE 0 :FLAT-FOLD-DOWN-LINETYPE 1

           :FLAT-TEXT-SIZE 3.5 :FLAT-DEFAULT-LINEWIDTH 0 :FLAT-TOOL-LINEWIDTH 0

           :FLAT-ERROR-LINEWIDTH 0 :FLAT-FOLD-UP-LINEWIDTH 0

           :FLAT-FOLD-DOWN-LINEWIDTH 0 :FLAT-SHOW-LABELS T

           :FLAT-SHOW-REFERENCE-POINT T :FLAT-WORKPLANE-OFFSET 0 :FLAT-PART-NAME

           "sha-flat" :FLAT-TRIM-BEND-LINES T :FLAT-SINGLE-BEND-TEXT NIL

           Smiley FrustratedHOW-MERGEABLE-LINES NIL ) )

And here you can change all the available entries.

Best regards

Wolfgang