IoT & Connectivity Tips

Video Author:                     Christophe Morfin Original Post Date:            October 2, 2017 Applicable Releases:        ThingWorx Analytics 8.1   Description:​ In this video we will walk thru the installation steps of ThingWorx Analytics Server 8.1.  This covers the Native Linux installation though the steps will be similar for a docker installation on Windows or Linux.    

Video Author:                     Christophe Morfin Original Post Date:            September 26, 2017 Applicable Releases:        ThingWorx Analytics 8.0 & 8.1   Description:​ This video shows the commands to execute to deploy the training and results microservices as docker container.  This is based on Docker Toolbox to highlight the specific settings required on Toolbox.    

Video Author:                     Mohammed Amine Chehaibi Original Post Date:            June 29, 2017 Applicable Releases:        ThingWorx Analytics 8.0 to 8.1   Description:​ In this video you will learn how to: To bind a property of an existing entity to the KEPServerEx Data Feed To create an Alert on that property and monitor it's behavior    

Video Author:                     Christophe Morfin                Original Post Date:            June 14, 2017 Applicable Releases:        ThingWorx Analytics 8.0 & 8.1   Description: In this video we show: How to deploy the microservices via jar files How to setup ThingWorx to use these microservices for anomaly detection    

Video Author:                     Asia Garrouj Original Post Date:            June 13, 2017 Applicable Releases:        ThingWorx Analytics 8.0   Description: This video is the third of a 3 part series walking you through how to setup ThingWatcher for Anomaly Detection. In this second video you will learn how to use the the Anomaly Mashup to visualize data received from a remote device.    

Video Author:                     Asia Garrouj Original Post Date:            June 13, 2017 Applicable Releases:        ThingWorx Analytics 8.0   Description: This video is the second of a 3 part series walking you through how to setup ThingWatcher for Anomaly Detection. In this second video you will learn how to use the "Discover UI" from the NextGen Composer to bind simulated data coming thru KEPServer for Anomaly Detection.    

Video Author:                      Asia Garrouj Original Post Date:            June 13, 2017 Applicable Releases:        ThingWorx Analytics 8.0   Description: This video is the first of a 3 part series walking you through how to setup ThingWatcher for Anomaly Detection. In this first video you will learn the basics of how to establish connectivity between KEPServer and the ThingWorx Platform.    

Video Author:                    Christophe Morfin Original Post Date:            June 9, 2017 Applicable Releases:        ThingWorx Analytics 8.0   Description: In this video we go through the steps to install ThingWorx Analytics Server 8.0.    

Video Author:                     Christophe Morfin Original Post Date:            June 2, 2017 Applicable Releases:        ThingWorx Analytics 7.4 to 8.1   Description: In this video we show a simple mashup and services in order to display the ThingPredictor's real time scoring results.  

Video Author:                     Mohammed Amine Chehaibi Original Post Date:            April 25, 2017 Applicable Releases:        ThingWorx Analytics 52.x to 8.0   Description: In this video, you will learn how to: Execute a “Signals” Job Retrieve the results of the “Signals” Job Execute a “Training Model” Job Retrieve the results of the “Training Model” Job    

Video Author:                     Christophe Morfin Original Post Date:            March 31, 2017 Applicable Releases:        ThingWorx Analytics 7.4 to 8.1   Description: This video walks you through the use of Analysis Replay to execute analysis events on historical data.    

Video Author:                     Asia Garrouj Original Post Date:            March 31, 2017 Applicable Releases:        ThingWorx Analytics 7.4 to 8.1   Description: This video is the first of a two part video series walking thru the configuration of Analysis Event which is applied for Real-Time Scoring.  This 1st video demonstrates how to create a Template and Thing which allows for the prediction model to score in real-time.   Note: This video is intended for demo purposes.  Customers who already have ThingWorx should already have their properties set-up.  In this case, you will need to configure the Analysis Event, which is demonstrated in the second part of this video series.    

Video Author:                     Asia Garrouj Original Post Date:            March 31, 2017 Applicable Releases:        ThingWorx Analytics 7.4 to 8.1   Description: This video will walk you through the first steps on how to set-up Analytics Manager for Real-Time Scoring and demonstrate how to share your predictive model from Analytics Builder into Analytics Manager, as well as to test the shared model.    

Video Author:                     Asia Garrouj Original Post Date:            March 31, 2017 Applicable Releases:        ThingWorx Analytics 7.4 to 8.1   Description: This video will walk you through the first steps on how to set-up Analytics Manager for Real-Time Scoring and demonstrate how to create an Analysis Provider and start the ThingPredictor Agent.     Please Note: In this video, the startup command for the Agent has changed in Release 8.1.  Please refer to the PTC Help center  

Video Author:                     Asia Garrouj Original Post Date:            December 9, 2016 Applicable Releases:        ThingWorx Analytics 52.0 to 8.1   Description: This video walks you through how to upload data and shows the configuration settings.   Please Note: In this video, the shown configuration settings page is different for ThingWorx Analytics 8.1.  

Video Author:                     Mohammed Amine Chehaibi Original Post Date:            December 2, 2016 Applicable Releases:        ThingWorx Analytics 52 to 8.0   Description: In this video, we will be using Postman to: Create a dataset Enter the dataset configuration Upload the CSV data file to the ThingWorx Analytics Server  

Video Author:                    Christophe Morfin Original Post Date:            September 13, 2016 Applicable Releases:        ThingWorx Analytics 52.1 to 8.1 Description: In this video we cover the different configuration steps required for ThingWorx Analytics Builder extension.   Please Note: This video uses Classic Composer.  The same operations can be done using the New Composer starting with version 8.0 as illustrated in the Help Center For release 8.1, the Settings menu differs from previous versions, see What's New in ThingWorx Analytics Builder 8.1 between times 00:12 sec to 00:40 sec for an up to date menu selection.  

Video Author:                     Christophe Morfin Original Post Date:            September 13, 2016 Applicable Releases:        ThingWorx Analytics 52.1 to 8.1 ​ Description: A short introduction to ThingWorx Analytics Builder The import of the ThingWorx Analytics Builder Extension  

Use Case: You’ve published a model from Analytics Builder to Analytics Manager, and then used service CreateOrUpdateThingTemplateForModel on resource TW.AnalysisServices.ModelManagementServicesAPI. A thing created from the resulting template will have an infotable called “data” which needs to be populated in order to trigger an Analysis Event & Job. For example you might have been following the online documentation for Analytics Manager > Working with Thing Predictor > Demo: Using Thing Predictor, link here. This script makes it easy to create a line of test data into field "data" on your thing to trigger the analysis event & job. Also fields causalTechnique, goalName and importantFieldCount are set programmatically, these are needed for the analysis event & job. Also this script might be useful as a general example of how to write to an infotable property on a thing. The JavaScript code is shown here and also attached as a text file to this post: me.causalTechnique = 'FULL_RANGE' me.goalName = 'predict_Compressor_failure' me.importantFieldCount = 3 // ThingPredictor.test_3f1a6a31-e388-4232-9e47-284572658a4a.InputParamsdataDataShape entry object //var newEntry = new Object(); var params = { infoTableName : "InfoTable", dataShapeName : "ThingPredictor.test-integer_afebaef3-b2cf-4347-824c-a39c11ddbb4a.InputParamsdataDataShape" }; // CreateInfoTableFromDataShape(infoTableName:STRING("InfoTable"), dataShapeName:STRING):INFOTABLE(ThingPredictor.test_3f1a6a31-e388-4232-9e47-284572658a4a.InputParamsdataDataShape) var myInfoTable = Resources["InfoTableFunctions"].CreateInfoTableFromDataShape(params); // 2 - CREATE INFOTABLE ROW USING object var newEntry = new Object(); newEntry._Pressure = 10.5; // NUMBER newEntry._Temperature = 45.1; // NUMBER newEntry._VibrationX = 81; // NUMBER newEntry._VibrationY = 65; // NUMBER //newEntry.key = 4; // STRING - isPrimaryKey = true // 3 - ADD INFOTABLE ROW USING TO INFOTABLE myInfoTable.AddRow(newEntry); // 3 – PERSIST INFOTABLE TO THE THING PROPERTY ‘data’ me.data = myInfoTable;

Pushbullet is a lightweight notifications platform and can be a way to explore Alerts and Subscriptions Basically create an an Alert on a property and Subscribe to that Alert Adding Alert to Property Humidity Adding Subscription The PTC-PushBulletHelper is just a generic Thing with a service called PushNotification var json = {     "body": Message,     "title":"Temperature fault",     "type":"note" }; var accessHeader = {     "Access-Token": "o.Hnm2DeiABcmbwuc7FSDmfWjfadiLXx2M" }; var params = {      proxyScheme: undefined /* STRING */,     headers: accessHeader /* JSON */,      ignoreSSLErrors: undefined /* BOOLEAN */,      useNTLM: undefined /* BOOLEAN */,      workstation: undefined /* STRING */,      useProxy: undefined /* BOOLEAN */,      withCookies: undefined /* BOOLEAN */,      proxyHost: undefined /* STRING */,      url: 'https://api.pushbullet.com/v2/pushes' /* STRING */,      content: json /* JSON */,      timeout: undefined /* NUMBER */,      proxyPort: undefined /* INTEGER */,      password: undefined /* STRING */,      domain: undefined /* STRING */,      username: undefined /* STRING */ }; // result: JSON var result = Resources["ContentLoaderFunctions"].PostJSON(params); You can test the Helper PushNotification service Next you can test the subscription

I have put together a small sample of how to get property values from a Windows Powershell command into Thingworx through an agent using the Java SDK. In order to use this you need to import entities from ExampleExport.xml and then run SteamSensorClient.java passing in the parameters shown in run-configuration.txt (URL, port and AppKey must be adapted for your system). ExampleExport.xml is a sample file distributed with the Java SDK which I’ve also included in the zipfile attached to this post. You need to go in Thingworx Composer to Import/Export … Import from File … Entities … Single File … Choose File … Import. Further instructions / details are given in this short video: Video Link : 2181