cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Description string from Parameter Dimensions in Relations

SOLVED
Garnet

Description string from Parameter Dimensions in Relations

I'm creating a string (i.e., Description that should include Name of the Material & Dimensions of the Material (Thickness Width x Length) using the relations platform of the model.

I'm storing the dimensions of Thickness, width & Length separately and created a new parameter called Description and the format of the description should be as follows:

Description = Material_Desc + " "+(Thickness (3 decimals)+" "+Width(1 decimal)+" x "+Length(no decimal))

Input for these Dimensional values:

Thickness = 0.079 ; Width = 7.337 ; Length = 47.244 ; Material_Desc = FIBERGLASS

Expected Description: Description = FIBERGLASS 0.079 7.3 x 47

Note: Rounding should be Width 7.337 = 7.3 (1 decimal) or 7.373 = 7.4

                                           Length 47.244 = 47 (0 decimal places) or 47.644 = 48

I'm using the following relation but getting errors:

Description = Material_Desc+" "+ITOS(THICKNESS) + " " + ITOS(FLOOR(WIDTH*10+0.5)/10) + "x" + ITOS(FLOOR(LENGTH+0.5)) 

Result from the above formula: T= 7x47

Any suggestions will be appreciated.

Tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Re: Description string from Parameter Dimensions in Relations

Psobejko Solution

Found solution from @psobejko response and achieved my requirement.

Thank you so much @psobejko 

1 REPLY 1
Highlighted

Re: Description string from Parameter Dimensions in Relations

Psobejko Solution

Found solution from @psobejko response and achieved my requirement.

Thank you so much @psobejko