Hi Hector,
here's all I know:
Assuming you have a project A with a CP 123:1 you have the following option:
- you can propagate the CP to a dev path of project A very easily by using "apply CP" (if 123:1 is already closed) or "resync by CP" (if 123:1 is not closed, or you know that you won't need an exactly identical configuration). In both cases any action in 123:1 referring to a project (e.g. "configure subproject") cannot be propagated. In both case you have a bunch of options for the commands that specify e.g. wether to apply the changes recursively ina subproject tree or "flat" , or if your CP and your target need to share the same "enty project",.... It's kind of tricky and error prone, and you will need some Try'n'Error turns to get your desired result (read the manual and especially the error message carefully!).
- if you want to propagate the CP to a complete different project B I'm afraid I can only guess, as I've never tried it so far: the member actions you can propagate will be very limited (add/drop shared members, set member revision for a shared archive) as there needs to be something in common between project A and B.
As far as I remember there is also a limitation that Projacts A and B must share the same "ancestors".
Depending on your scenario, you should have a look at these commands as well:
- add/configure shared subproject
- set member rule
HTH Matthias
