cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Stay updated on what is happening on the PTC Community by subscribing to PTC Community Announcements. X

AFX/EFX replace tube/profile

didriek
12-Amethyst

AFX/EFX replace tube/profile

Hi all,

I'm working on a framework where all tubes have to be replaced by an other tube...

Can that be done by some simple changes/instructions or all need to be redefined by AFX?

Re-assign new profile and regenerate or ....?

>>> 30x30 profile was used, now it needs to be 50x50

If I edit the extrude in each tube, my positioning by AFX is not ok anymore

Thanks,

Didriek


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
2 REPLIES 2
VladimirPalffy
14-Alexandrite
(To:didriek)

Hi,

here is the Quick AFX/EFX (Expert Framework Extension) video tutorial for you

Regards,

Vladimir

Best Regards,
Vladimir Palffy

Hello Didriek,

just got to profiles dialog, go to tab modify then select the size 50x50 press replace by new instance button and then select the profiles which shall be changed to 50x50. To update profile movements relative to curve you go to tab move of profiles dialog and then press button update profile move (4th button in first row)

If you have more questions just contact me at stefan@buw-soft.de.

I also can give you AFX training guides if you need them

Stefan

Announcements
NEW Creo+ Topics: Real-time Collaboration


Top Tags