cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Have a PTC product question you need answered fast? Chances are someone has asked it before. Learn about the community search. X

Automatic Selection of all surface between two surface

hvyas-2
7-Bedrock

Automatic Selection of all surface between two surface

Hi All,

 I would like to automatically select all the surfaces (1,2,3,4) between two highlighted surfaces ( 1 & 4 , See attached image) in creo. The thing is I don't want to select all four surfaces individually. Is there any command or any way where I need to select only 1st and 4th surface and creo would select all surfaces in between automatically?

Your help would be highly appreciated.

ACCEPTED SOLUTION

Accepted Solutions
tbraxton
22-Sapphire I
(To:hvyas-2)

Use the seed and bound selection method to implement your objective. The command sequence is not exactly what you describe but is the closest available.

 

See the PTC QRC for tips (page 12 in the English version).

Creo 4 Quick Reference Card 

========================================
Involute Development, LLC
Consulting Engineers
Specialists in Creo Parametric

View solution in original post

1 REPLY 1
tbraxton
22-Sapphire I
(To:hvyas-2)

Use the seed and bound selection method to implement your objective. The command sequence is not exactly what you describe but is the closest available.

 

See the PTC QRC for tips (page 12 in the English version).

Creo 4 Quick Reference Card 

========================================
Involute Development, LLC
Consulting Engineers
Specialists in Creo Parametric
Announcements
NEW Creo+ Topics: Real-time Collaboration


Top Tags