Blank screen HELP!

[KevinB]

Hello,

Whenever I start a new 'part', I get a blank screen with which I cannot do anything. The Front, Top, and Right planes are not shown. thus I cannot start any project or work. Here's the picture ...

Any idea?

Any help is greatly appreciated.

For your information, I have a school's edition of Creo Parametric.

Thanks,

Kevin.

This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

[KshetrabasiMaha]

Hi

Check the following image

(If the datums are not visible at start you need to change some config setting)

Presetly you can active this with the following

Regards

K.Mahanta

[KevinB]

Thanks for the reply.

I checked that, but that it's already marked. Yet, the datums still do not show.

Any more ideas?

[KshetrabasiMaha]

Hi

You can give a screenshot of your part view page to confirm that you have selected datum

But there might be another reason

You can check the layer tree for hidden layers

Regards

K.Mahanta

[KevinB]

Here's an image showing that all the datum planes have been activiated, yet they still do not show.

Thanks!

[MartinHanak]

Kevin,

to exclude graphics problems, please add the following option into your config.pro file. It turns off OPENGL graphics. Restart Creo and try to create a new part. If datum planes are visible, then the problem is related to your graphic card or its drivers.

graphics win32_gdi

Martin Hanak

[KshetrabasiMaha]

Hi

The issue is already resolved by updating graphics driver (Thanks to Adam Hass)

Check the following link

http://communities.ptc.com/message/176309#176309

Regards

K.Mahanta