cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Stay updated on what is happening on the PTC Community by subscribing to PTC Community Announcements. X

Drawing Models Automatically Change

bshepherd
4-Participant

Drawing Models Automatically Change

Our company makes weldment assemblies that each cutplate is dependent on a base machining part.  We then make a drawing of the weldment assembly and also add all the cut plates that make up the assembly to the drawing.  All the cut plates are detailed on the last few sheets of the drawing.  When I switch to one of these sheets it automatically sets the drawing model to the model of the first placed view, instead of staying with the current active model.  This is frustrating because you then have to set the active model to the assembly every time you switch sheets to regen all of the parts.  This was not the case in WF2.0 (what we upgraded from).  Any ideas on how to keep the active model?


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions
mender
6-Contributor
(To:bshepherd)

The intent was to make life easier for people who document an assembly on sheet 1, then key parts on each of several subsequent sheets, and wish to be able to easily add views/tables for these other models, but it's true that a number of customers said they'd personally prefer it not to change.  So we put in a config option for it:

auto_update_default_dwg_model no

Enjoy!

View solution in original post

4 REPLIES 4
mender
6-Contributor
(To:bshepherd)

The intent was to make life easier for people who document an assembly on sheet 1, then key parts on each of several subsequent sheets, and wish to be able to easily add views/tables for these other models, but it's true that a number of customers said they'd personally prefer it not to change.  So we put in a config option for it:

auto_update_default_dwg_model no

Enjoy!

bshepherd
4-Participant
(To:mender)

Thank you.

dgschaefer
21-Topaz II
(To:mender)

When was this functionality and the config option implemented?

--
Doug Schaefer | Experienced Mechanical Design Engineer
LinkedIn
BenLoosli
23-Emerald II
(To:dgschaefer)

It is in Creo2 m100.

Top Tags