Placing a label on a curve

[pfadams]

Good afternoon
We are doing a layout of a new panel and we have to put a
stylized logo on a non regular curve (not a radius)
We have a copy of the label but not just the logo artwork. Can
the label be forced to the curve?????

Thanx in advance
Paul

This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

[DeanLong]

Can you provide a picture of what you want to do?

Not following you. "forced onto a curve"?

[ptc-726111]

From the description, I think you are inquiring about how to use the decal tool in Pro-E. Here are some links from the MCAD Central forum about using decals:

• Topic: decal placement issue: http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=36584&PN=2

• Topic: adding 3D texture: http://www.mcadcentral.com/proe/forum/forum_posts.asp?TID=37667&KW=logo+decal
  

If you have the artwork file, I have posted a technique of how the place the artwork onto a curved surface:

• Modeling 3-D CAD parts with silk-screening (Laser marking, Pad Printing, etc.): http://www.appianwaytech.com/blog/2010/02/26/tips-and-tricks/94

• Part II of modeling 3-D CAD parts with silk-screening (Pro/Engineer): http://www.appianwaytech.com/blog/2010/03/05/tips-and-tricks/111

Good afternoon
We are doing a layout of a new panel and we have to put a
stylized logo on a non regular curve (not a radius)
We have a copy of the label but not just the logo artwork. Can
the label be forced to the curve?????

Thanx in advance
Paul