cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can change your system assigned username to something more personal in your community settings. X

Small text (part number) on a part won't regen.

melias-2
3-Newcomer

Small text (part number) on a part won't regen.

When trying to show a part number (.12" high) on a part that is 60" long, the text will not regen. If the text is made much larger Creo has no problem. Is there a setting that can be changed that would allow this to show? We do MBD with Creo 3.0, M100


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
3 REPLIES 3
StephenW
23-Emerald III
(To:melias-2)

This is an accuracy issue. Go to FILE - PREPARE - MODEL PROPERTIES - ACCURACY

If you have relative accuracy, it's based on a length vs. width ratio. Long part causes problems with small details.

If you have absolute accuracy, it's a explicit value is specified.

I suspect you probably have relative accuracy and you just need to make the number smaller.

Be careful, save before you change it. If you have merges, all your accuracies of all your parts must match.

Changing accuracy can cause unexpected failures.

TomU
23-Emerald IV
(To:melias-2)

What Stephen Williams‌ said.  You may need to enable absolute accuracy.  It also doesn't hurt to provide a default value for absolute accuracy.

default_abs_accuracy  0.0001

enable_absolute_accuracy yes

TomD.inPDX
17-Peridot
(To:TomU)

+1! 

PTC really should automate accuracy when it comes to using thin features on large parts.

Maybe a prompt that says something like, "Yes, make my %^&$# feature" button.

Announcements
NEW Creo+ Topics: Real-time Collaboration


Top Tags