cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Your Friends List is a way to easily have access to the community members that you interact with the most! X

Improve Corner Chamfers to Remove Material Added by Rounds

danderson
11-Garnet

Improve Corner Chamfers to Remove Material Added by Rounds

Would be nice if they would improve corner chamfers so they would remove material added by rounds.

The 2 images below are both trying to create the same geometry. The only difference is the order of the chamfer.

First image has the chamfer before the round and the second has the chamfer applied after the round which does not work (should be 6mm per edge)

Corner chamfer stops at the edge of the round, will not remove round material.

Would also be nice to be able to select multiple corners to apply the same size corner chamfer to.

corner chamfer 1 2016-01-07_8-18-37.jpg

corner chamfer 2 2016-01-07_8-18-37.jpg

1 REPLY 1
Kevin
10-Marble
(To:danderson)

‌i believe the reason the chamfer needs to be created first is because the corner that you are chamfering is not on the round edge in the second picture

Announcements
Business Continuity with Creo: Learn more about it here.

Top Tags