Sketch view refresh problem

[rdimitrov-2]

Hi All ,

Here is my problem,

First i will start with my pc configuration:

CPU: Athlon X4

VGA: some radeon card with 1gb DDR5

Ram: 8GB DDR3

SSD hard drive

So i am using Creo 3.0 and the problem is that when i enter the sketch and try to move the view around the planes(whit middle button of the mouse) it didnt refresh and all i see is a lot of lines. the problem exist only when i am in the sketch.

Thanks in advance and have a nice day!

[MartinHanak · Accepted solution]

Radoslav,

start with well known trick, add the following option at the end of config.pro file.

graphics win32_gdi

Test Creo.

Martin Hanak

[rdimitrov-2]

Hi Martin,

I want to thank you, it works now everything working great !!!

Regards,

Radoslav Dimitrov

[MartinHanak]

Radoslav,

now you know that the problem is related to graphics drivers. So the next step is to remove graphics win32_gdi option from config.pro and update graphics drivers. This step enables Creo to use OPENGL graphics instead of Windows WIN32_GDI graphics.

Martin Hanak

[Tmetcalf]

Good day Radoslav,

I am glad Martin Hanak‌ was able to help; would you please set his answer as correct so those who may be following this discussion or may search this topic in the future?

Thank you,

Toby