USB Type A (female) connector CAD model (overmolding)

[ptc-726111]

Hello,

Does anyone have a female USB connector CAD model that is suitable for overmolding? See here (http://www.3dcadbrowser.com/preview.aspx?modelcode=43467) fox example, except I am looking for one that is straight and not right-angled. I did find some USB connectors from Cypress Industries (http://www.cypressindustries.com/products/usb.html), but no CAD models are available for downloading.

If you have a 3D CAD model, I am using Pro-E WF 3.0 for this project.

Regards,

Chris Thompson

[cromero]

Chris

Check Samtec. I've downloaded USB models from there.

[ptc-726111]

Hello,

Thanks for all the replies. I finally found what I need for my application, and it is an USB cable "A" female to wires (http://www.usbfirewire.com/Parts/rr-af-bwst-xxg.html) available at USB FireWire. I need to design a custom mount for this USB female connector, and it seems the male connectors are more readily available.

As far as sites that offer USB connector downloads, they are as follows:

• USBFireWire: http://www.usbfirewire.com/


• Samtec: http://www.samtec.com/panelio/USB_Interfaces.aspx


• 3D Contentcentral: http://www.3dcontentcentral.com/Search.aspx?arg=usb


• Molex: www.molex.com

Also, there are male cable connector kits (front shell, insert body, rear shell --> assembled plug) available from both Cypress Industries and Keystone Electronics, but no female cable connector kits that I can find.

Chris Thompson