cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

how to generate a cam profile for parallel indexing drive

sthirunavukkara
Participant

how to generate a cam profile for parallel indexing drive

ew

3 REPLIES 3

Re: how to generate a cam profile for parallel indexing drive

To generate the cam profile you need graph for angle vs distance(position)

You have to integrate the sweep profile with that graph

And if my folders available, there is lot of cam profile available including Globoidal Cam yet I don't remember any other information

Parthiban Kannan

href="https://www.linkedin.com/in/parthiban-kannan/" target="_blank"

Re: how to generate a cam profile for parallel indexing drive

This paralllely indexing cam is not  ordinary cam. In normal cam  the X axis is angle and Y axis is linear displacement of the cam. This cam is both X and Y axis are anglular values. The output is rotation and not a linear displacement.

Re: how to generate a cam profile for parallel indexing drive

Hello, Boss

That's why I've mentioned also Globoidal Cam. It also nearly same as parallel indexing cam. The roller axis perpendicular in Globoidal cam and parallel in Parallel indexing drive. Even parallel indexing cam having a single profile but Globoidal cam having multiple profiles.

Parthiban Kannan

href="https://www.linkedin.com/in/parthiban-kannan/" target="_blank"
Announcements
Business Continuity with Creo: Learn more about it here.