cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - When posting, your subject should be specific and summarize your question. Here are some additional tips on asking a great question. X

Renewable Energy Technology In NZ Using Solar Energy.

KarlBogha
14-Alexandrite

Renewable Energy Technology In NZ Using Solar Energy.

This report may raise the reader's interest in PV technology. Reader maybe a current 'student of science and engineering', a graduate, and a business. The in-depth study areas are in of physics, chemistry, manufacturing, and electrical engineering. Here Mathcad / Prime can play a role.

Business Case Study Developing And Commercialising RET In NZ Using Solar Energy.

Purpose: Business Case Study.

This report is written for developing and commercialising Renewable Energy Technologies (RET) in New Zealand which utilise solar energy for its primary energy source.

 

This report is prepared with the intent of an investor who is planning on capitalising commercially on solar RET in New Zealand.

 

The cost of the PV systems has dropped dramatically in the last years and is expected to continue dropping. From 2009 to 2015, there was 56% reduction in the total cost, 77% in the PV modules, 45% in inverter cost, and 44% in installation-related costs. All this helped in promoting solar technology worldwide as an alternative energy to other traditional energy sources, and renewable. (Malinowski et al, 2017).

N/A.
ACCEPTED SOLUTION

Accepted Solutions

That is why he probably posted it in PTCooler.

3 REPLIES 3

Hi,

 

Whose the moderator.  This article has nothing to do with mathcad/prime.  This article did not use mathcad/prime in the creation of the article.  It is off topic for this forum.

 

Regards

Terry 

This report may raise the reader's interest in PV technology. Reader maybe a current 'student of science and engineering', a graduate, and a business. The in-depth study areas are in of physics, chemistry, manufacturing, and electrical engineering. Here Mathcad / Prime can play a role.

N/A.

That is why he probably posted it in PTCooler.

Announcements

Top Tags