Note especially to anyone at NASA...
Edwards has been in business 60+ years but is now growing exponentially, especially through acquisitions, and we are investing heavily in standards, templates, best practices, guidelines, etc.
I've just been studying this document - best I've ever come across in all these years. Major kudos to the author(s).
The latest of this document publicly available seems to be Rev D, 2011, and refers throughout to Pro/Engineer, not Creo Parametric.
Two Questions to anyone at NASA who subscribes to this post:
A) Is there a newer revision of this or a a replacement document available which addresses Creo Parametric?
B) There are several referenced documents (e.g. "Desktop Instruction ED-CAD-DI-001" with their location on internal NASA websites (e.g. http://iesweb.ndc.nasa.gov/ies/Mechanical/ProE/ProEtipsn.asp,
http://iesweb.ndc.nasa.gov/ies/Mechanical/ProE/ProEtipsn.asp ) mentioned in the document. I'm wondering if any of these have been made public. Would love to take a look at some of them.
Happy to buy a beer for anyone who can shed some light on this one (I owe lots of people a beer ).
thanks in advance
Can't speak to MSFC's documents. Though another interesting document is NASA-STD-(I)-0007 | NASA Technical Standards System (NTSS)
Mike Lockwood wrote:
.... I've just been studying this document - best I've ever come across in all these years. Major kudos to the author(s).
Why you do not contact to the specified e-mail address (-) from this page?
Here is another useful document "MSFC-STD-555" (dated by 2013 year, but it contains a reference to the same document "MSFC Computer-Aided Design (CAD) Standard" by 2011 year, which you specified earlier): MSFC-STD-555 | NASA Technical Standards System (NTSS)
NASA-STD-(I)-0007 was created from the MSFC-STD-3528 CAD Standard, a stripped down version with a few modifications as an Interoperablility CAD Standard between the 10 NASA centers, since not every center uses Creo Parametric.