cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Need to share some code when posting a question or reply? Make sure to use the "Insert code sample" menu option. Learn more! X

2D Curved Text in Drawing Mode

wfalco
15-Moonstone

2D Curved Text in Drawing Mode

Is it possible to create curved 2d text in drawing mode?

WayneF

Creo 6.0

1 ACCEPTED SOLUTION

Accepted Solutions
tbraxton
21-Topaz II
(To:wfalco)

Sketched text is not supported in drawing mode AFAIK. You can add a sketched curve with text in part and assembly mode and then show this on the drawing. If you want to filter the visibility of the sketch in the dwg (i.e. only show it in some views) then you can control the display by layer.

 

You could of course create a custom symbol with curved text and place that in drawing mode as required.

========================================
Involute Development, LLC
Consulting Engineers
Specialists in Creo Parametric

View solution in original post

1 REPLY 1
tbraxton
21-Topaz II
(To:wfalco)

Sketched text is not supported in drawing mode AFAIK. You can add a sketched curve with text in part and assembly mode and then show this on the drawing. If you want to filter the visibility of the sketch in the dwg (i.e. only show it in some views) then you can control the display by layer.

 

You could of course create a custom symbol with curved text and place that in drawing mode as required.

========================================
Involute Development, LLC
Consulting Engineers
Specialists in Creo Parametric
Top Tags