cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can Bookmark boards, posts or articles that you'd like to access again easily! X

CROSS SECTION ARROWS ACROSS VIEW

Sadrok
6-Contributor

CROSS SECTION ARROWS ACROSS VIEW

How do I break the cross-section arrows so they don't cross over the view? I've seen it done on many drawings but I can't figure out how.

Thanks!arrow.JPG 

ACCEPTED SOLUTION

Accepted Solutions
KenFarley
21-Topaz I
(To:Sadrok)

When you're in the drawing mode, you can break those lines using by:

(1) Activating the "Annotate" tab.

(2) In the "Edit" subgroup of the ribbon, click on the "Break" function

(3) Pick two points on the section line, and the portion of it between the two points is erased from view.

You can have multiple breaks in the same section line, if you find you need to cross over multiple things.

View solution in original post

1 REPLY 1
KenFarley
21-Topaz I
(To:Sadrok)

When you're in the drawing mode, you can break those lines using by:

(1) Activating the "Annotate" tab.

(2) In the "Edit" subgroup of the ribbon, click on the "Break" function

(3) Pick two points on the section line, and the portion of it between the two points is erased from view.

You can have multiple breaks in the same section line, if you find you need to cross over multiple things.

Announcements
NEW Creo+ Topics: Real-time Collaboration


Top Tags